FarmingClub.cz

Neví někdo jak vložit do stroje další zvuk? Tučně vyznačené sem vkládal já....samozřejmě ten zvukový soubor mám dané v sounds, ale ve hře to prostě nefunguje

<sounds>
<start file="sounds/E512_startwork.ogg" innerRadius="12.0" outerRadius="60.0">
<volume indoor="1.5" outdoor="2.7"/>
<pitch indoor="1.00" outdoor="1.00"/>
<lowpassGain indoor="0.75" outdoor="1.00"/>
</start>
<work file="sounds/E512_work.ogg" innerRadius="12.0" outerRadius="60.0" fadeOut="0.3">
<volume indoor="1.5" outdoor="3"/>
<pitch indoor="1.00" outdoor="1.00"/>
<lowpassGain indoor="0.75" outdoor="1.00"/>
</work>
<work file="sounds/mlocarnia.ogg" innerRadius="12.0" outerRadius="60.0" fadeOut="0.3">
<volume indoor="1.5" outdoor="3"/>
<pitch indoor="1.00" outdoor="1.00"/>
<lowpassGain indoor="0.75" outdoor="1.00"/>
</work>
<stop file="sounds/E512_stopwork.ogg" innerRadius="12.0" outerRadius="60.0" fadeIn="0.1">
<volume indoor="1.5" outdoor="2.7"/>
<pitch indoor="1.00" outdoor="1.00"/>
<lowpassGain indoor="0.75" outdoor="1.00"/>
</stop>
</sounds>

Nu nevím ale mám pocit že do FS 22 se zvuk zapisuje nově.

• <?xml version="1.0" encoding="utf-8" standalone="no" ?>
  <sounds>
  <motorized>
  <sounds>
  <motorStart template="DEFAULT_MOTOR_START" file="sounds/E512_Start.ogg" volumeScale="2" />
  <motorStop template="DEFAULT_MOTOR_STOP" file="sounds/E512_Stop.ogg" volumeScale="2" />
  
  <motor template="DEFAULT_MOTOR_IDLE" file="sounds/E512_idle.ogg" volumeScale="2.2" />
  <motor template="DEFAULT_MOTOR_OFFLOAD_RUN" file="sounds/E512_Run.ogg" volumeScale="2" />
  <motor template="HARVESTER_MOTOR_ONLOAD_RUN" file="sounds/E512_Run.ogg" volumeScale="2" />
  <motor template="indoorCabinRumble" />
  <!--<gearbox template="DEFAULT_GEARBOX" file="sounds/gear.ogg" volumeScale="2" />-->
  
  <retarder template="DEFAULT_RETARDER" file="sounds/E512_Getriebe.ogg" volumeScale="2" />
  <!--<airCompressorStart template="BRAKE_COMPRESSOR_START" />
  <airCompressorStop template="BRAKE_COMPRESSOR_STOP" />
  <airCompressorRun template="BRAKE_COMPRESSOR_RUN" />-->
  <compressedAir template="BRAKE_SMALL" />
  <aircompressed template="BRAKE_BIZON" file="sounds/old_brake.ogg" volumeScale="2" />
  <airRelease template="BRAKE_REGULATOR_VALVE" />
  
  <reverseDrive template="REVERSE_BEEP_03" volumeScale="1.8"/>
  </sounds>
  </motorized>
  
  <lights>
  <sounds>
  <toggleLights template="SWITCH_01" />
  <turnLight template="SWITCH_TURNLIGHT" />
  </sounds>
  </lights>
  
  <drivable>
  <sounds>
  <waterSplash template="WATER_SPLASH_01" />
  </sounds>
  </drivable>
  
  <attacherJoints>
  <sounds>
  <attach template="ATTACH_01"/>
  <hydraulic template="defaultHydraulicSound" />
  </sounds>
  </attacherJoints>
  
  <honk>
  <sound template="HONK_IDEAL9T" />
  </honk>
  
  <combine>
  <sounds>
  <start template="HARVESTER_TOOL_START" file="sounds/Threshing_Start.ogg"/>
  <work file="sounds/Threshing2.ogg" innerRadius="15.0" outerRadius="100.0" fadeOut="0.1" linkNode="0>">
  <volume indoor="0.35" outdoor="0.85"/>
  <pitch indoor="1.00" outdoor="1.00">
  <modifier type="COMBINE_LOAD" value="0.00" modifiedValue="1.00"/>
  <modifier type="COMBINE_LOAD" value="1.00" modifiedValue="0.95"/>
  </pitch>
  <lowpassGain indoor="0.50" outdoor="1.00"/>
  </work>
  <stop template="HARVESTER_TOOL_STOP" file="sounds/Threshing_Stop.ogg"/>
  <chopStraw template="chopStrawDischarge" linkNode="chopper2"/>
  <dropStraw template="dropStrawDischarge" linkNode="chopper2"/>
  <fill template="grainTankFill" volumeScale="0.45" linkNode="grainTankAuger"/>
  </sounds>
  </combine>
  </sounds>

Takto jsem už nastavoval zvuk u některých převedených módů, a zatím to funguje.

Super, funguje to! Díky.